Difference between revisions of "BOM page"
From jenny3dprint opensource
Warriorlious (talk | contribs) |
Warriorlious (talk | contribs) |
||
| Line 80: | Line 80: | ||
|- | |- | ||
| 9|| Z blet block top|| 8|| STL 3d print || | | 9|| Z blet block top|| 8|| STL 3d print || | ||
|} | |||
{| class="wikitable sortable" | |||
|+ Motion part | |||
|- | |||
! order !! item !! quantity !! note !! thumbnail | |||
|- | |||
| 1|| Pulley GT2 20T || 6|| 5mm inner diameter/ 10mm belt width|| | |||
|- | |||
| 2|| Idler GT2 20T no toothed || 10||5mm inner diameter/ 10mm belt width || | |||
|- | |||
| 3|| Idler GT2 20T toothed || 6||5mm inner diameter/ 10mm belt width || | |||
|- | |||
| 4|| Pulley GT2 16T || 4||5mm inner diameter/ 6mm belt width || | |||
|- | |||
| 5|| Pulley GT2 80T || 4||5mm inner diameter/ 6mm belt width || | |||
|- | |||
| 6|| Belt Loop GT2 || 4|| 222mm /6mm belt width || | |||
|- | |||
| 7|| Open Belt LL-2GT-9 || [https://github.com/yzyyou/jenny-corexy-V1.2/blob/main/BOM/BOM-Dimension-calculator.xlsx Dimension-calculator]|| XYZ belt || | |||
|- | |||
| 8|| Bearing F685ZZ|| 12|| Z motor module || | |||
|- | |||
| 9|| Bearing L block || 8|| must tapping M5 || | |||
|- | |||
| 10|| Shaft || 4|| 5x60mm || | |||
|} | |} | ||
Revision as of 22:33, 15 August 2021
photo BOM is here.
Dimension-calculator is used to input a print size generate the extrusions length、linear rails length、build plate size and mounting hole pitch、blet length and , etc.
| order | item | quantity | note | thumbnail |
|---|---|---|---|---|
| 1 | Aluminum plate 1# | 4 | Z extrusion bottom | |
| 2 | Aluminum plate 2# | 1 | power socket plate | |
| 3 | Aluminum plate 3# | 1 | XY gantry left bottom | |
| 4 | Aluminum plate 4# | 1 | XY gantry right bottom | |
| 5 | Aluminum plate 5# | 1 | XY gantry middle left bottom | |
| 6 | Aluminum plate 6# | 1 | XY gantry middle right bottom | |
| 7 | Aluminum plate 7# | 2 | XY gantry front bottom | |
| 8 | Aluminum plate 8# | 2 | XY gantry front top | |
| 9 | Aluminum plate 9# | 1 | XY gantry right top | |
| 10 | Aluminum plate 10# | 1 | XY gantry left top | |
| 11 | Aluminum plate 11# | 4 | XY gantry middle right top | |
| 12 | Aluminum plate 12# | 1 | XY gantry middle right left top | |
| 13 | Aluminum plate 13# | 2 | XY printhead belt fixation block | |
| 14 | Aluminum plate 14# | 8 | Z belt fixation block | |
| order | item | quantity | note | thumbnail |
| 15 | Aluminum plate 15# | 4 | Z fixation block top | |
| 16 | Aluminum plate 16# | 4 | Z frame bottom block | |
| 17 | Aluminum plate 17# | 4 | Z motor module middle block | |
| 18 | Aluminum plate 18# | 4 | Z motor module up block | |
| 19 | Aluminum plate 19# | 4 | Z motor module bottlom block | |
| 20 | Aluminum plate 20# | 4 | Z adjust block | |
| 21 | Aluminum plate 21# | 8 | Z linear rails fixation | |
| 22 | Aluminum plate 22# | 2 | frame bottom block |
| order | item | quantity | note | thumbnail |
|---|---|---|---|---|
| 1 | Extrusion 3D fixation | 4 | frame top | |
| 2 | castor | 4 | ||
| 3 | Extrusion Right-angle fastener | 4 | frame bottom | |
| 4 | Extrusion Right-angle fastener built-in | 16 | ||
| 5 | Gantry cardan joint | 4 | ||
| 6 | Printhead fixation L block | 1 | ||
| 7 | Gantry linear rails block | 4 | STL 3d print | |
| 8 | Z blet block bottom | 8 | STL 3d print | |
| 9 | Z blet block top | 8 | STL 3d print |
| order | item | quantity | note | thumbnail |
|---|---|---|---|---|
| 1 | Pulley GT2 20T | 6 | 5mm inner diameter/ 10mm belt width | |
| 2 | Idler GT2 20T no toothed | 10 | 5mm inner diameter/ 10mm belt width | |
| 3 | Idler GT2 20T toothed | 6 | 5mm inner diameter/ 10mm belt width | |
| 4 | Pulley GT2 16T | 4 | 5mm inner diameter/ 6mm belt width | |
| 5 | Pulley GT2 80T | 4 | 5mm inner diameter/ 6mm belt width | |
| 6 | Belt Loop GT2 | 4 | 222mm /6mm belt width | |
| 7 | Open Belt LL-2GT-9 | Dimension-calculator | XYZ belt | |
| 8 | Bearing F685ZZ | 12 | Z motor module | |
| 9 | Bearing L block | 8 | must tapping M5 | |
| 10 | Shaft | 4 | 5x60mm |
